Recommended Replacement Electric 10 by 2-1/4 Inch Brake Assemblies for 2007 Flagstaff RV
Question:
I have a 2007 flagstaff bumper pull RV, and I want to replace the breaks, the only info on the axle is not clear but I think it was AL KO363828 n its rated for 1591 kg, the measurements on the actual drum is 10 in diameter by 2 1/4 depth
asked by: Juan
Helpful Expert Reply:
All 10 x 2-1/4 inch brake assemblies are for 3500 lb axles, so there's not any worries about compatibility. You can choose between a standard brake assembly like part # AKEBRK-35L for the left hand side and # AKEBRK-35R for the right hand or a self-adjusting brake assembly like the # AKEBRK-35L for the left side or # AKEBRK-35R for the right hand.
Although both sets of brakes I mentioned would be compatible with your axles, I'd recommend the self-adjusting brake assemblies. The self adjusting feature is very convenient. Every time you apply the trailer brakes, the brake shoes are adjusted if needed for the perfect amount of braking every time. I've linked you to a video showing you how to do the initial set-up on the brakes.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Continue Researching
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Do Self Adjusting Trailer Brake Assemblies Have to be Manually Adjusted Initially
- Q&A: Which Replacement Electric Brakes For 10" Drum Stamped KA90831
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How Much Does a Boat and Trailer Weigh?
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: Can the 7-Way Plug On the Electric Jack w/ Footplate EJ-3527-BBX Be Removed