How to Pick Out Replacement Hubs and Brake Assemblies for a 2009 Komfort 255 Trailer

Question:

I have a 2009 Komfort 255. Can you tell me which one of your break assemblies is correct for that trailer? Thanks I can tell you it has 6 bolt studs. Thanks.

asked by: Paul L

Helpful Expert Reply:

It sounds like you have hub/drums on your 2009 Komfort 255 that have a 6 bolt pattern. The only 6 bolt pattern is the 6 on 5-1/2 inch bolt pattern so that is helpful in narrowing down what you need.

You will need to get the bearing numbers out of the hubs you currently have so that we can pick out the correct hubs. Or, use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

For a left hand brake assembly you would want part # 23-459, for the right hand side you would want part # 23-458.

expert reply by: Jameson C