How to Obtain a Custom Trailer Axle
Question:
I would like to purchase an axle like your T20BTR-6048 BT9 spindles with 4 on 4inch hubs but need a hub face to hub face dimension of 63inch and a spring center to center dimension of 53. Can you get such an axle for me?
asked by: Jay E
0
Expert Reply:
The compatible 2K 'off the shelf' axles we carry would have a 60 or a 72 inch hub face dimension or a 48 or 58 spring center dimension. You'll need a custom axle, which we don't carry.
If you'd care to reply and provide your city, state and zip code, I'd be happy to direct you to a local Dexter Axle distributor that can order an axle for you.
expert reply by:
Mike L
0
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Search Results: weld on spindle
- Search Results: nylon leaf spring bushings
- Shop: Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Article: Determining Trailer Tongue Weight
- Shop: Trailer Hitch
- Video: Review of Kenda Tires and Wheels - Tire with Wheel - AM3H290
- Search Results: jack knife sofa
- Search Results: square axle
- Article: How to Measure a Trailer Axle
- Q&A: Will the Dexter 10" Nev-R-Adjust Electric Trailer Brake Kit Work With 2-1/2" Wide Hubs
- Q&A: Can I Use Dexter Brakes, Wheel Bearings, And Seals On My Henschen 3500 LB Axle
- Q&A: Replacement Axle for AL-KO T35 3,500 Pound Axle with 85 Inch Hub Length
- Q&A: How Do Pal Nuts Remove from Roller Shafts
- Q&A: Do Hubs have to be Removed to Add Grease to Bearings on an EZ Lube Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: How to Measure to Pick Out New Axle for a Harbour Freight Trailer
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Article: Most Popular Wheel Bearings
- Article: How to Raise Your Travel Trailer Height
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Slipper Spring Trailer Suspension System Review
Ryan S.
5/21/2020
I need a 2000 lb 43” axel with spring mount at 5.5”