Can Polypropylene Trailer Vent Be Adjusted to Fit Thick Trailer Walls
Question:
I have a cargomate enclosed trailer and it is insulated with the board type insulation. This im sure makes the wall thicker than the standard thickness. What is the best way to mount it, ensuring water-proofing ect? Do you sell spacers?
asked by: Logan
Expert Reply:
The 2-Piece Polypropylene Trailer Vent # HMAV2-AVT2 that you referenced will work on a trailer wall up to 2 inches thick. There is no spacer designed to fit with the vent. You can use a sealant like part # 0160297, to help seal the trailer from the elements.
The Loctite urethane sealant is applied as a thick liquid to parts before assembly or in seams after assembly to create a waterproof bond in a variety of applications. It can seal doors, windows, vents and other areas in enclosed trailers where water could enter.
The trailer vent does not include the mounting screws. We sell the Wood Screws, part # 30587, if you are installing to wood or a similar material.
Products Referenced in This Question
TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - White
- Lubricants Sealants Adhesives
- Sealant
- Multi-Purpose Sealant
- 10.1 oz
- Flint Hill Goods
more information >
Wood Screw - 8 x 3/4" Slotted Round Head
- Accessories and Parts
- Tie Down Anchors
- Hardware
- Screws
- 3/4 Inch Long
- Wood Screws
- Flint Hill Goods
more information >
Product Page this Question was Asked From
2-Piece Exterior Wall Vent for Enclosed Trailers - Polypropylene - 3" Diameter Hole - Black
- RV Vents and Fans
- Vent
- Wall Vent
- No Fan
- 6W x 8L Inch
- Plastic
- Black
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Maintenance Schedule
- Q&A: Side Wall Vent Recommendation for an Enclosed Trailer for Maximum Air Flow
- Q&A: Recommended Parts to Rewire an Old Trailer w/ Brakes
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Reese Extension/Reducer # RP45292 Compatibility with Class V Factory Hitch on 2013 Ram 2500
- Q&A: Trailer Hitch Extension to Tow Motorcycle with 2012 Chevy Silverado 2500 with Lance Camper
- Article: Rooftop Cargo Carriers
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)