How to Pick Out a Back Up Hub for a Harbor Freight Trailer
Question:
I have this trailer. harbor freight trailer 94564 Do you carry replacement hubs? I do regular maintenance, but would feel more comfortable with an extra hub along with the spare tire when on trips.
asked by: Ted S
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Q&A: Trailer Grease Seal to Replace 127194TB
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Q&A: Should I Buy a Horse Trailer with Torsion Axles or Straight Axles with Leaf Springs
- Q&A: Raising Trailer with Welded On Torsion Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Roadmaster Vehicle Specific Base Plates