bing tracking image
Q & A Icon

Even Brake Test Pumps Brake Pedal Twice then Fails  

Question:

We have a 2007 jeep Liberty and we are hooking up to our RV. When you push Test button the brake will apply twice not the third time then the red light comes on.We have tried 2 or 3 times and it does the same thing, this just started happening, can you help

0

Expert Reply:

I spoke with my contact over at Roadmaster and have some things that you can check. When the Even Brake # RM-9400 pushes on the brake pedal 3 times what it is doing is making sure that it is receiving a brake signal from the cold side of the brake switch. If it does not detect the signal then it does exactly what you have described.

The brake signal it is looking for goes through terminal 1 on the Even Brake. On a 2007 Jeep Liberty you should be tapped into a white/tan wire on the brake switch. This attachment could have fallen off so check the attachment to the brake switch wire. Making a new attachment to that same wire might be all that is needed.

It is also possible that the stop light or CHMSL (center high mount stop light) fuse is blown on the vehicle.

expert reply by:
0
Michael H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>