Hub and Spindle Recommendation for a Custom ATV Off Road Trailer
Question:
I am having a double axle ATV off-road trailer built. I would like to mount the same size ATV tires and rims as I have in the back of my 2013 Honda Rincon AT 26X11R14 with Maxxis Bighorn 2.0 on ITP rims. What kind of hubs and spindles would I need so that I can mount my ATV rims and tires on the trailer? They should have a weight capacity of lbs. 2000. If you have this in store, I would need 4 sets. Thanks for your help.
asked by: Matthias R
Expert Reply:
In order to use the same wheels from your ATV on your off-road trailer you are going to first need to determine what bolt pattern you have on your wheels and then be sure to get the correct hub to match. If you are unsure of what bolt pattern you have on your trailer check out the link I attached to the right.
Since it sounds like you don't have hubs or spindles yet for the axles what you will need to do is check out the link I attached that shows all of the hubs we offer. You will need to select the bolt pattern you want from the filters on the left side of the page. This will show you all of the hubs that will fit your wheels. I would recommend you get one properly rated for what your trailer needs in terms of capacities.
On most of the product pages for the hubs there will be a section on the right side of the page that has related products. There should be a spindle there that would work with the hub you pick out.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Most Popular Wheel Bearings
- Q&A: Right Replacement Hubs for a Trailer with 3500 Pound Axle and 5 on 4-1/2 Bolt Pattern
- Article: Trailer Tire Sizing
- Q&A: Replacement for Dexter 8-248 Idler Hub
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Hub for Dexter 8-248
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Q&A: What is the Outer Diameter of Center of Dexter Trailer Hub Assembly - 3,500-lb Axles - 5 on 4-1/2
- Q&A: What is Maxx Coat on DeeMaxx Disc Brake Kit and Why is There a Mix of That and Stainless Steel
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule