5 on 5 Bolt Pattern Hub and Drum Recommendation for the Timbren Axle-Less System # ASR3500S06
Question:
Product # ASR3500S06 If I purchase this axle product. What else do I need to buy to complete it. Here is the set up I plan on doing 4inch lift with electric brakes and with a 5 on 5 bolt pattern.
asked by: Paul Z
Expert Reply:
All you would need is the correct 5 on 5 inch bolt pattern hub/drums and brake assemblies to go along with the Timbren Axle-Less Trailer Suspension System # ASR3500S06 and you would be good to go.
For a hub with the correct capacity and bolt pattern that would fit the spindles of the # ASR3500S06 you would want the Trailer Hub and Drum Assembly # 84556UC3. I attached an install video for you to check out.
For brake assemblies you would want the part # 23-26 for the left hand side and the part # 23-27 for the right hand side.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: Help Determining Wire Colors of Trailer Wiring for Installing New 7-Way
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Q&A: 2020 Aliner Expedition Suspension Upgrade for Dexter 3,500 lb Torsion Axle
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: How to Identify Trailer Axles
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: Overview of Lubricating Grease
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Raise Your Travel Trailer Height