How to Pick Out a Replacement Hub For a Trailer with Timken Bearings
Question:
I have a 6 lug hub that broke off.Hit a curb,later on down the road it broke taking tire and outer part of hub off in a canal. What I have left is the inner part of hub with the bearings. Outer bearing is Timken 09074. Inner bearing is Timken 15112. I dont see these in your listings.If you dont have something that will work,Ill need a new axle to fit a 60foot frame width. Any help would be greatly appreciated!!!!! PS Its a duel axle trailer.
asked by: Harold H
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Since your Timken bearing don't cross reference with the bearings we carry your best option to see if there is a hub available would be to take some measurements with a dial caliper on your spindle. You want to measure where the seal, and inner and outer bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
I also attached a page that has all of our 60 inch axles we carry. You should note that they all have a spring center to spring center dimension of 48 inches.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Search Results: boat trailer spindles
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-26-27 Review
- Video: Demco Straight Tongue Trailer Coupler - Standard Coupler - 12564 Review
- Video: Review of Peterson Trailer Lights - Clearance Lights - M152R
- Video: Optronics Fusion LED Trailer Tail Light Installation
- Video: CE Smith Boat Trailer Parts CE27656A Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35 Review
- Search Results: side marker trailer light
- Search Results: a70gb
- Search Results: a45cb
- Search Results: stl211xrb
- Shop: 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Red and Clear Lens
- Shop: Peterson Piranha LED Clearance and Side Marker Trailer Light w/ Turn Signal - 6 Diodes - Red Lens
- Q&A: Replacement Braking Assemblies Hubs, And Drums For A Boat Trailer With 3.5K Axles
- Q&A: How to Find New Hubs for Mobile Home Axle
- Q&A: Determining Replacement Bearings, Races and Seals for Dual Axle Tricker Trailer
- Q&A: Are New Drums Required When Replacing Hydraulic Drum Brakes with Electric Drum Brakes
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- Q&A: Dexter Tandem-Axle Trailer Hanger Kit for 2 Inch Slipper Springs
- Q&A: Can 6-Leaf Slipper Spring 8000lb e46SR Be Installed On 7000lb Trailer Axle?