Dimensions of Tandem-Axle Trailer Equalizer
Question:
Is the equalizer 10 1/8inch long or is that bolt hole spacing. My equalizer measures appox. 11 1/8inch with bolt spacing 10 1/8inch This is on a pequea 10,000 lb. trailer.
asked by: Mike
Helpful Expert Reply:
I went out to the warehouse and pulled part # AP202 and took some measurements of the equalizer for you.
From the center of the bolt hole to the center of the bolt hole the equalizer measures exactly 10 inches.
The overall length is 11-1/16".
These equalizers are designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles.
I have included a picture showing the measurements for you to check out.
Product Page this Question was Asked From
Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 9-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Swan-Shaped Equalizer for 2" Wide Slipper Springs - 10-1/8" Long - 7/8" Center Hole
- Shop: Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 7/8" Center Hole
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Search Results: slipper spring hanger kit
- Search Results: 13~4
- Video: Redline Tandem Axle Trailer Equalizer Kit Review
- Search Results: equalizer
- Video: Review of Redline Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-205-01
- Shop: Vehicle Tow Bar Brake System
- Article: Testing Breakaway Systems
- Article: Trailer Maintenance Schedule
- Q&A: Are the Never Fail Bushings or Bronze Bushings Offered for 2 Inch Wide Leaf Springs
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Does Tang Washer Go Between Spindle Nut and Hub Washer
- Q&A: Tang Washer Recommendation for Use on Trailer Spindle with L44649 Bearings
- Q&A: Replacement Triple Axle Hanger Kit for 2015 Kaufman Car Hauler with 7k Axles
- Q&A: Recommended Coupler Lock For Adjustable Ball Coupler
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Best Ladder Racks
- Article: How to Measure a Trailer Axle
- Article: 2023 Best Gifts for RVers & Campers