Would the Titan Disc Brake Kit Actuator, item # T4843800 fit a Kaufman Car Hauler
Question:
Do you make a kit to perform this conversion and can you recomend a shop in the Florida area to do the work? contact
asked by: Rod M
Expert Reply:
There are a few things you will want to check out before ordering the Titan Disc Brake Kit and BrakeRite Electric-Hydraulic Actuator, item # T4843800. First, check the axle capacity of each axle and make sure it is 3,500 lbs. Next, check that the bearings in your hubs are # L68149 inner and # L44649 outer bearings. Next, check the brake mounting flanges on the trailer, they should have a 4 bolt square pattern with 2-7/8 inches between the bolt hole centers. Finally, check the wheel size and bolt pattern. The wheels on your trailer should have a 5 on 4-1/2 inch bolt pattern.
If all of these match up then this kit is the correct kit for your trailer and has all of the parts needed for the conversion, as long as your mounting location does not require additional parts.
Any qualified trailer shop in your area should be able to install this without a problem.
You will also need a brake controller compatible with electric over hydraulic brakes. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >