Is 20 Threads Per Inch a Fine Thread Pitch for a 1/2 inch Wheel Bolt
Question:
I believe 20 threads per inch is considered fineinch pitch versus coarse. My old lug nuts are fine pitch and just wanted to make sure I am buying the right ones. Thanks
asked by: Dave
1
Helpful Expert Reply:
20 threads per inch would be a fine thread pitch on a 1/2 inch wheel bolt like the part # CE11051. A coarse thread would be 14 threads per inch.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 13/16 Inch Outer Diameter
- 60-Degree Cone
- Zinc-Plated Steel
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Shop: Kenda K500 SuperTurf Tire with 8" White Wheel - 5 on 4-1/2 - Load Range B
- Q&A: Typical Trailer Lug Nut Diameter and Thread Pitch
- Shop: Floor Mats
- Video: etrailer Spare Tire Lock Review
- Shop: etrailer Spare Tire Lock for 1/4" to 7/8" Thick Rims - Keyed Alike
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU59FR
- Video: Americana Tires and Wheels - Wheel Only - AM20041 Review
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Q&A: Trailer Brakes Not Working On A 2016 Chevrolet Silverado 3500
- Search Results: bt8 spindle
- Search Results: wheels
- Search Results: golf cart tires and wheels
- Search Results: hubs
- Search Results: spindle dimensions
- Search Results: spindle
- Search Results: trailer wheel
- Shop: Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black
- Shop: Replacement Trailer Hub Bearing - L44643
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H325 Review
- Q&A: Can Taller Tires and Wheels be Put on a Pontoon Boat Trailer
- Q&A: Can Smaller Tires be Added to Boat Trailer to Lower Height
- Q&A: Do Trailer and Vehicle Lug Nuts in 1/2x20 Size Use the Same Cone Angle
- Video: MaxxTow Hitch Receiver Lock Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Q&A: Correct 1/2 Lug Nuts for Trailer Wheels
- Q&A: Replacement Wheel Stud for Lippert 3,500 lb Axle
- Shop: Trailer Hitch