Repacking Bearings on a 2004 Fleetwood Yuma Pop-Up
Question:
Per the expert if I have cartridge bearings I do not need to repack them. How do I know if I have cartridge bearings? thank you.
asked by: Charles K
0
Expert Reply:
On your pop-up trailer it would be very unlikely that you have cartridge bearing. To see what they look like check out the part # 31-73-3.
Most likely you have standard bearings. Which the FAQ article I attached to the right would walk you through everything you would need to do.
expert reply by:
Jameson C
0
Products Referenced in This Question
Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 42 MM I.D.
- Bearing 31-73-3
- 5200 lbs Axle
- 6000 lbs Axle
- Dexter
more information >
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Correct Bearings for AL-KO Axle On Palomino Pinto Trailer
- Q&A: Trailer Hub Replacement For Lippert Axle NV178936
- Q&A: Replacement Hub Assembly for Older Boat Trailer with 4 Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Depth Measurement For Hubs That Fit A 1" Straight Spindle
- Q&A: Replacement Bearings and Hub for Malone MicroSport Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: My Trailer Hitch Doesn't Fit