Replacement Hub Assemblies for Demco Kar Kaddy Tow Dolly
Question:
I have a kar kaddy 11 made by demco. I need bearing/hub assemblies or shop where these pressed bearings can be removed and replaced.
asked by: David F
Expert Reply:
In order to select appropriate replacement hub assemblies you'll just need to match the part numbers or the characteristics of your hubs. You will need to match up your bearing and seal numbers from the original parts if possible, as well as the axle's weight rating (which should be indicted on the axle itself) and the wheel bolt pattern. The linked article shows you how to determine your bolt pattern.
The Demco website shows several models of their Kar Kaddy tow dolly but does not include in the specifications any details about the bearing set used.
The link provided will show you all hub/drum assemblies which you can narrow down using the filters in the margin.
If you cannot obtain the bearing numbers you will need to use a precision digital caliper to measure the spindles at several points in order to select appropriate replacement hubs. The linked photo shows you where to look for the part numbers and also where to measure the spindles. You need to measure to the nearest thousandth of an inch (three decimal points) and then you can use the link provided to choose bearings whose diameters match those dimensions.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure a Trailer Axle
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Q&A: Can Electric Brakes be Used on a Boat Trailer