Replacement Bearings for JLG 7610 Triple-L Power Deck Trailer
Question:
Looking for a kit, All bearings, race, pin ect. for JLG Trailer model # 7610
asked by: Robert
Expert Reply:
I was able to find some specs for your JLG 7610 Triple-L Power Deck Trailer but not confirmation of the bearing set used by the manufacturer. It is not unusual for trailer makers to vary the bearing sets used from one production run to another.
The easiest way to find correct replacement bearings, races, seals, etc. is to use the part references from the originals. The linked photo shows the typical location and appearance of those numbers. You can then use our search function to find replacements.
If part numbers cannot be found you will need to take precise measurements of the spots on the spindle marked in the same photo. You will need to use a digital caliper and measure to the nearest thousandth of an inch. You can then use the links provided to find suitable parts. We offer some items in kit form and also as individual components. One link is for kits and the other is for separate components; use the filters in the left margin to select items of the appropriate dimensions to match your measurements.
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Camco RV Water Heater Anode Rod - Aluminum - 3/4" Diameter x 9-1/2" Long
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Bearing Buddy And Spindle Grease Seal For The AKIHUB-545-2-1K Idler Hub Assembly
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Options For Replacing A Tie Down Turbo Lube 48394 Clear Oil Bath Cap
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Article: Adding Electric Over Hydraulic Disc Brakes