Replacement Hub And Bearings Races And Seals On Trailer With 12 Inch Wheels
Question:
I have a trailer axle that both hubs and bearings are completely rusted out. Splin seems to be in decent shape my problem is the only part number I can pull are the inner and outer race. Which is l44610. The wheel was 12 inch on 5x4.4. Im looking for hub assembly that will fit. Bearings had no part number. I understand that l44610 has two bearings does it matter if both races were l44610?
asked by: Adam
Expert Reply:
We do have a hub that uses part # L44610 for both the inner and outer race.
The hub we offer is designed for 2,000 and 2,200 lb axles and will work with wheels that range from 8 to 12 inch diameter. This part number is # 8-259-50. The bolt pattern for this hub is 5 on 4-1/2.
The bearings you can use for this hub are either part # L44643 or part # L44649. You will need to use a precision instrument like a digital caliper to measure the spindle where the bearings are used. If the diameter is 1.000 inch, then you would use # L44643. If the diameter is 1.063, the bearing you need is # L44649.
The grease seal you need for this system is either part # 34823, or part # 10-9. Once again you will need to measure the spindle in the locations marked on the attached drawing and see which one you need. The # 34823 seal has an I.D of 1.249 inches, and an O.D. of 1.983 inches. The # 10-9 measures 1.500 inches I.D., and 1.987 inches O.D.
I have attached some links to a few videos for some of the products I described above and also a couple of helpful articles about replacing trailer bearings you may want to check out.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44649
- L44643
- L44649
- For 2000 lbs Axles
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: spindle nut
- Search Results: castle nut
- Video: Redline Trailer Spindles 165931 Review
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Search Results: ce33201ga~hub
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How to Find Correct Replacement Axle For Bandit Galvanized Trailer
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Castle Locknut for Equalizer Bolt - 7/8" Diameter
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Trailer Wiring
- Q&A: What are the Dimensions of a #99 Spindle
- Search Results: wire strippers
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Search Results: boat trailer
- Search Results: coupler lock
- Q&A: After How Many Years Should Trailer Tires Be Replaced
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: trailer hub kit
- Shop: Roof Rack
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Trailer Hitch Receiver Sizes