Replacement Hub Drum for Utility Trailer Using LM48548 Inner Bearings
Question:
I have a utility trailer that I purchased a few years ago. I do not know the make of axle. I want to replace the hub and drum and the brake assemblies. The current inner bearings are LM48548 the outers are L44649. Drums are 6 lug 5.5” measure 2.5” on the brake surface. Electric trailer brakes. Can you tell me which parts I’m going to need?
asked by: Richard D
Expert Reply:
The LM48548 is commonly used as the inner bearing for a AH25555F agricultural hub. Agricultural hubs are generally a low-speed application that really aren't meant to be used at higher speeds. I'm sorry to say that none of the hub/drums we offer would be compatible with your spindles.
You can look online for a replacement hub, but I'm afraid you'll find that replacing your axle with one that uses a more common bearing will be your best bet. We sell some off-the-shelf axles, if you would reply with your hub face to hub face and spring center to spring center dimensions, I'd be happy to check to see if anything we carry would work for you.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Search Results: lm48548
- Video: Dexter Electric Brake Assembly Review
- Article: Most Popular Wheel Bearings
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: How To Upgrade Old Dexter Axle From 5 on 5 Inch to 6 on 5-1/2 Inch Bolt Pattern
- Q&A: Can Hydraulic Trailer Brake Drums be Used with Electric Brakes
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Search Results: shackle strap
- Q&A: Effect of Installing Shorter Shackle Straps on Trailer with Axle Over-Under Kit
- Q&A: Replacement for Hub with LM48548 Outer and L12649 Outer Bearings
- Q&A: Do All Trailers with Electric Brakes have to have a Breakaway System
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure a Trailer Axle
- Q&A: Are Bearings L44549 and L44649 Interchangeable