What Is Backspacing Measurement Of Rim On AM3S862 Tire/Wheel Combo

Question

Question:

Could you give me the backspacing measurement on the rim on your AM3S862 please? Thank you,

asked by: Mike L

0

Expert Reply:

The Loadstar Bias Trailer Tire with 15 Inch White Wheel, part # AM3S862, wheel rim measures 15 x 6 inches, and has a zero offset.

I have attached a drawing of a wheel and at the bottom of the drawing it is marked where the backspacing measurement is taken. This wheel has 3-1/2 inches backspacing.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

For Dexter hub/drums that are 10 inch diameter like the #AKHD-545-35-EZ-K the smallest wheel diameter you can go with is 13 inch like the #AM31994 which is a tire size of 175/80R13 mounted on a wheel with a 5 on 4-1/2 inch bolt pattern.

view full answer...

Answer 2

Dexstar Steel Mini Mod Trailer Wheel #AM20545 does not have any offset. I confirmed this with Dextsar. It sounds like you are asking about the backspacing which is the distance from the mounting flange to the outside of the rim. Since this is a 6…

view full answer...

Answer 3

Definitely a smart idea to check, and the overall diameter when the tire is inflated is 28.1 inches, and the width is 8.4 inches for the Loadstar ST225/75D15 tire and wheel you asked about, which is the following part number: - Loadstar ST225/75D15…

view full answer...

Answer 4

The pilot hole diameter only matters in one of two scenarios: First, if the wheel secures to the hub using bolts instead of lug nuts then the pilot hole has to be exact because that is how it centers on the hub. Second, if the wheel secures to the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 10

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 11

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

What Is Backspacing Measurement Of Rim On AM3S862 Tire/Wheel Combo

Product Page this Question was Asked From

Continue Researching