Rewiring and Installing New Tail Lights, Wiring, and Trailer Connector on a Trailer

Question:

what am I missing, what eles do I need? to do a complete redo on utility trailer A20WB 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30inch Ground Wire a70gb Rubber Grommet for 6-1/2inch Oval Trailer Tail Lights STL22RB Miro-Flex, Sealed, 6-1/2inch Oval, LED Trailer Stop/Turn/Tail Light, 3-Function, 12 Diode A47PB Right Angle 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights B472R Red Aluminum Oval Reflector 459075-1 Wire Loom, 1/2inch Diameter per Foot FA1131822 Self-Tapping Screw - 1/4inch -14 x 3/4inch Long - Zinc 05731-5 16-14 Gauge Butt Connector - 5 Pack

asked by: P R

Expert Reply:

It looks like you have the lights and grommets, wiring harnesses, hardware, reflector, wire loom and butt connectors. But the butt connectors will be too large for the wiring harness. You will need 22 to 18 gauge 5-pack # 05730-5. The wiring on the wishbone harness is 19 to 20 gauge.

You may also want to invest in some dielectric grease # 11755 to keep moisture and corrosion out of the electrical connections.

And if your trailer has any clearance lights, those are missing for the list. I have included a link to the clearance lights we carry for you.

expert reply by: Michael H