Installation Tips When Installing Fold-Away Coupler Hinge Kit, Part # FHDPB330301

Question:

what kind of bit would you recommend for holes on fold way coupler-bolt on-and would a hack saw cut tounge of trailer? basiaclly what tools are neccesary for bolt on device?

asked by: pat o

Expert Reply:

Any drill bit designed for drilling through metal will work, although tungsten carbide bits are the best (although pricey). Here are a few tips for drilling through metal. Start with a small bit, drill a pilot hole and switch to an intermediate sized bit, followed by the final diameter. Drill at a slow speed, while applying steady pressure.

I suppose you could use a hacksaw to cut your trailer tongue, but it would take quite some time and many, many blades. Your best bet would be to use a reciprocating saw or an angle grinder with a cut-off wheel installed on it.

expert reply by: Mike L