Replacement Bearings for Older Trailer with Dexter Hubs
Question:
I need to replace the wheel bearings on an older trailer. The Hub is Dexter 8-258 Bearing race looks to have L44510 Slovakia this all seems so close in specs to L44610? I went to auto parts store today and they were not sure.
asked by: Randy L
Expert Reply:
The sure-fire method for finding a correct replacement bearing is the part number from the original part. Usually a bearing part number will be stamped into the outer portion (please refer to the linked photo). If this cannot be found you can select a bearing based on a precise measurement of the spindle's journal surface where the bearing rides; this requires a very accurate measurement be taken with a precision digital caliper (again please refer to the photo for the locations on the spindle where you need to measure).
With that information you can use the link provided to select bearings. The left hand margin includes filters that will let you choose the weight rating of your axle and then the bearing dimensions you need to match your spindles.
In some cases we may have a complete kit; otherwise it will be necessary for you to select the individual components.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Search Results: ad2527e seal
- Search Results: grease seal 10~19
- Search Results: l68149
- Search Results: wheel bearing grease
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Search Results: dexter wheel bearings
- Search Results: l58149
- Search Results: l44610 race
- Q&A: Closest Replacement For A Greystone F2611E Fireplace
- Article: Trailer Wiring Diagrams
- Q&A: Bearing and Brake Assembly Kit Recommendation for Dexter Hub 8-250
- Q&A: Bearing Kit for 3,500 lb Trailer Hub
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Measure a Trailer Axle
- Q&A: Are Bearings L44549 and L44649 Interchangeable