Parts Needed to Flat Tow a 2003 Chevy Trailblazer
Question:
What parts do i need to tow a 2003 chevy trailblazer? What braking unit should i use?
asked by: John S
Helpful Expert Reply:
First you will need to start with a base plate kit, for that you would want the Roadmaster XL Kit part # 3109-1.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Even Brake proportional system, # RM-9400, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Roadmaster Tail Light Wiring Kit with Bulbs
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Bulb and Socket Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Roadmaster Even Brake Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Not Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Wiring Diagrams
- Article: Must-Have Flat Towing Components
- Q&A: 2024 Ford Maverick Wiring Needed for Flat Towing Behind a Motorhome
- Q&A: Does The Demco Baseplate # DM77YV Require That You Trim The Air Shutters/Dam On A Ford Maverick
- Article: How to Choose a High-Low Adapter
- Q&A: How Can I Adapt The SD Non-Binding Tow Bar e34ZR To D-Rings On A Jeep Bumper?
- Q&A: Availability of InvisiBrake Installation Video on 1998 Jeep Wrangler
- Q&A: Parts Needed to Flat Tow 2024 Jeep Wrangler 4xe
- Q&A: Recommended Flat Towing Parts for a 2023 Ford Bronco Badlands w/ a Capable Bumper
- Q&A: Included in Package of Roadmaster Falcon 2 Tow Bar
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)