Brake Controller Installation on 2009 Chevy Avalanche

Question:

How is a trailer brake installed on a 09 Avalanch?

asked by: Don N

Expert Reply:

The tow package wiring on your Avalanche is located under the dash, between the brake pedal and the emergency brake. Look for a bundle of 4 or 5 wires with a white tag on it. The red wire with the black stripe is the 12-volt power feed, attach it to the red wire on the controller. The white wire is the ground connection and would attach to the white wire on the controller. The light blue wire runs to the brake stop light switch, and connects to the red wire on the controller. The dark blue wire connects to the blue wire on the brake controller.

You will need to choose a brake controller. I would recommend the Tekonsha Prodigy P2, part # 90885. The Prodigy P2 is one of our best selling brake controllers, it is very simple to use. If your truck does not already have the 7-way connector on the rear of your Avalanche, you will also need part # PK11916.

We have an installation video that will walk you through the installation process, I will provide a link to the video.

expert reply by: Mike L