Are Replacement Hubs Available for a Harbor Freight Trailer
Question:
I have a harbor freight trailer. What hubs do I need. It has 4 hole 12 inch wheels. Its a 4 x 8 heavy duty folding model. Thanks
asked by: Marc P
Expert Reply:
Harbor Freight trailers do not typically use standard hubs or spindles. In most of the situations that we have encountered, we do not carry a hub that uses the same bearings and seal that Harbor Freight uses. The best way to determine if we have a hub that will fit your trailer would be to find the bearing and grease seal part numbers and search for a hub that uses the same bearings and seal. I have attached a photo that shows where the part numbers are located.
If you do not have the bearings or they are too hard to see, you can also measure the bearing and seal journals on the spindle. The photo I attached also shows where to measure on a spindle. With these measurement we can determine if any of our hubs will fit. We strongly recommend using a precise measuring tool such as a dial caliper because these measurement must be exact to the thousandths of an inch.
If you can send me these part numbers or measurements, I would be happy to search our products for you.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How Far Between the Back of the Wheels When Installed on the 60" Trailer Axle with Idler Hubs?
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Replacement Trailer Hub Bearing - L44643
- Article: Best Camper Jacks
- Article: Best Landing Gear
- Shop: Steel Spoke Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Galvanized Finish
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - White
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Wider Axle Options For a Harbor Freight 4 x 8 Folding Trailer Which Allow For Larger Wheels & Tires
- Q&A: Do Harbor Freight Trailers with 5 Bolt Pattern Use Standard 5 Bolt Pattern
- Search Results: harbor freight trailer
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Search Results: jack stand
- Search Results: jack blocks
- Search Results: jack stands
- Q&A: Replacement Components To Upgrade Harbor Freight Folding Trailer
- Q&A: Can I Put Larger Wheels and Tires On My Harbor Freight Trailer By Replacing the Hubs?
- Video: etrailer Trailer Idler Hub Assembly Review AKIHUB-440-2-1K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: hub kit
- Search Results: hub
- Search Results: 30205 bearing kit
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30670 Review