Selecting a Bearing Buddy Bearing Protector for Utility Trailer with 2-1/3-Inch Hub Bore
Question:
orI have a haulmaster 4x8 utiity trailer with a 2-1/3 in hub which bearing protector
asked by: Chris
Expert Reply:
In order to select a Bearing Buddy Bearing Protector such as # BB2328 you will need to know the hub bore to the nearest thousandth of an inch (three decimal places), e.g. 2.328-inches. Bearing Buddies come in many sizes and the differences between them can be quite small. Also, some have threads to allow use in threaded hubs.
The best way to proceed is to use a precision digital caliper to take your measurement. You can then use the link provided to select a Bearing Buddy kit that has the appropriate outside diameter. Sizes range from 1.781-inches to 2.717-inches.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.328 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Bearing Buddy for 2-3/8" Grease Cap
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: Upgrading a Dexter Torsion Axle to a Heavier Duty Option
- Q&A: What Diameter is a Dexter 4,000 lb Axle
- Q&A: How Many Leaves are on 3,500 lb Trailer Axle Leaf Springs
- Q&A: How to Determine Correct Replacement Axle for Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Big Truck Big RV
- Article: My Trailer Hitch Doesn't Fit
- Article: Most Popular Wheel Bearings
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop