7 and 4-Way Connector for a 2008 Ford Expedition
Question:
Will this item fit a 2008 Ford Expedition. I want to replace the standard flat 4 plug with this combination plug. and will the connector reach. Thank you in advance
asked by: Mike B
Expert Reply:
Since your truck has a factory 4-Way connector at the rear of the vehicle you will need the Adapter 4 Pole to 7 Pole and 4 Pole, item # 37185, which is designed for the 1997 - 2008 Ford Expedition with factory 4-Flat. The connections for the brake feed, power and axillary functions will be on the forward side of a connector that is attached to the driver side frame rail above the spare tire. You will need to splice the needed connections into the wiring using a circuit tester, item # PTW2993, to find the correct circuit for each wire.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight