Electric Over Hydraulic Brake Actuator Not Applying Trailer Brakes Using Brake Controller
Question:
I seem to be getting power to the actuator but the hydrolic brakes are not working. i have a 2012 F350 ford truck. I thought it was the brake controller, however I installed a new aftermarket brake controller and still no brakes. The brakes lock up when I pull the safety pin. Desperately need help.
asked by: Tommy
Expert Reply:
Electric over hydraulic brake actuators like # K71-651 only work with certain brake controllers. The brake controller will have to have an electric over hydraulic mode to be compatible. I recommend using the P2 # 90885 or P3 # 90195.
Make sure that you have the unit properly grounded to the negative terminal on the trailer battery and to the ground wire on the trailer connector. Check the other wiring connections and make sure they are not corroded.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Where to Position the Trailer Axle?
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size