What Size Wrenches are Used to Tighten the Curt Hitch Ball Part # C40030
Question:
I ordered one of these to put on my weight-distributing hitch which requires the nut to be in an enclosed space, so I am trying to confirm what size OPEN-ENDED wrenches it takes. I believe the nut is 1 7/8inch , what size fits the flat spots on the ball? I prefer not to gouge up the surface with a pipe wrench or something, and would rather use properly sized non-adjustable wrenches.
asked by: Andrew M
Expert Reply:
Yes, I went out into our warehouse to measure the nut of the Trailer Hitch Ball # C40030 and found that a 1-7/8 inch wrench would be the correct size. The same size wrench would be used for the top portion of the ball as well.
Product Page this Question was Asked From
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Continue Researching
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - White Powder Coat
- Video: Curt Weight Distribution - WD With Sway Control - C17499 Review
- Video: Review of Curt Hitch Ball - Trailer Hitch Ball - C40030
- Shop: Deka Wire - Jacketed 7-Wire - per Foot
- Search Results: echo
- Shop: Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Shop: Brake Controller
- Shop: Karrier ST225/75R15 Radial Trailer Tire - Load Range C
- Shop: Provider ST205/75R14 Radial Trailer Tire - Load Range C
- Q&A: Trailer Turn Signals Both Blink at the Same Time When Right or Left Turn Signal is Turned On
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Search Results: scale
- Q&A: Margin of Error for the etrailer Trailer Tongue Weight Scale
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Q&A: How is the Length of the Deka Wire - Jacketed 7-Wire DW04914-1 Ordered
- Q&A: Should Each Brake on a Single Axle Trailer be Wired Directly to a Junction Box
- Video: etrailer Campers and Utility Trailers Tongue Weight Scale Review
- Video: Pollak Wiring PK52249 Review
- Shop: Trailer Hitch
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Video: Dexstar Tires and Wheels - Wheel Only - AM20551 Review
- Video: Review of Taskmaster Trailer Tires and Wheels - Off Road Tire with Wheel - TA52RR
- Video: Kenda Tires and Wheels - Tire with Wheel - AM32459 Review
- Shop: Towing Mirrors
- Shop: Suspension Enhancement
- Search Results: 2 58 ball
- Search Results: hitch ball wrench
- Search Results: 2 516 ball