What is the Length of the Bolts of the Rack'em Double Barrel Trailer Tailgate Assist # RA-27C
Question:
Will the unit and bracket mount to a 2.5inch square tubing with the included hardware? What is the length of the included hardware?
asked by: Tom
0
Expert Reply:
I went and measured the mounting bolts that come with the Rack'em Double Barrel Trailer Tailgate Assist # RA-27C and found that they are 2 inches long. You will need to provide longer bolts to install this on your trailer frame that is 2-1/2 inches square.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Rack'Em Double Barrel Utility Trailer Tailgate Lift Assist w/ Chain - 200 lbs
- Lift Supports
- Trailer
- Tailgate Assist
- Steel
- RackEm
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Make Raising and Lowering a Heavy Trailer Ramp Easier
- Q&A: Ramp Assist Recommendation for a 60 lb Ramp
- Q&A: Alternate Mounting For Rackem Double Barrel tailgate Assist On Trailer With 3 Foot Sides
- Q&A: How Can Double Barrel Trailer Tailgate Assist # RA27C be Mounted on 24 inch Tall Trailer Side Rails
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Q&A: Recommended Gate/Ramp Assist and Hinge for Trailer Build
- Q&A: How to Adjust Assist Tension on the Gorilla Lift Tailgate Assist
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Measure a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)