Can the 2 Leaf Spring on my 1977 Boat Trailer be Replaced with the 3 Leaf Spring # WIF3
Question:
I have a broken 2 leaf spring on a 77 boat trailer would like to put on the 3 leaf spring WIF3 for 3000 lb axle rather than the SP-038275 for 2000 lb axle. Would that be wise? measurement for the broken spring are 31 and a half so thats the right size by my calc. My boat is an old 15 foot Bayliner and would like less bounce. I plan to replace both springs on each side.
asked by: Dean R
Expert Reply:
Over time leaf springs will flatten making them a bit longer than their than their original length. You mentioned that the springs on your 77 boat trailer measure 31-1/2 inches so the 3-Leaf Slipper Spring, # SP-039275, measuring 30-1/4 inches would work as a replacement for your current 2 leaf springs.
Part # e29SR that you mentioned is a 2 leaf spring for 2,000 pound axles. Please keep in mind that although you will be increasing the weight capacity of the springs by upgrading to the 3 leaf, this will not increase the weight capacity of the trailer or the axles and will make for a rougher ride.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 1800 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: CE Smith Single Axle Trailer Fender - 16 Gauge Steel - 8" Wheels - Qty 1
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-1K
- Q&A: Replacement Bearing Kit for Snowbear Trailer with L44643 Bearings
- Video: Review of etrailer 3 Leaf Slipper Spring - e49SR
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Q&A: Replacement Suspension For a Old Trailer With 32-1/4" Slipper Springs and 1-3/4" Axles
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: 2-Leaf Slipper Spring w/ Flat End for 1,800-lb Trailer Axles - 30" Long
- Search Results: slipper springs
- Search Results: sp~039275
- Search Results: 32 inch leaf spring
- Search Results: spring bushing
- Search Results: trailer tongue extension
- Q&A: Replacement for 32 Inch Long Slipper Spring
- Video: Redline Trailer Suspension 7-95 Review
- Video: Review of etrailer 2 Leaf Slipper Spring - e29SR
- Video: Yates Rubber Boat Trailer Parts - Roller and Bunk Parts - YR300B Review
- Video: Yates Bow Roller for Boat Trailers Review
- Q&A: Replacement Slipper Springs for 1982 Cox Boat Trailer
- Q&A: What is the Difference Between Load Range B and C Trailer Tires of the Same Size
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Search Results: bow roller
- Search Results: paint