Is Mounting Hardware Included with CE Smith Bolster and Swivel Bracket Assemblies, # CE10000G-4
Question:
To these holsters come with the bolts that are directly screwed/attached to the buckboards themselves?
asked by: Tim
Expert Reply:
The CE Smith Bolster and Swivel Bracket Assemblies, # CE10000G-4, do not come with any mounting hardware. Because the brackets can be used for different size and type bunks they do not include the hardware because it would not cover all applications. The holes that attach the bunk board to the swivel bracket are 3/8 inches in diameter.
To attach the brackets to the trailer frame you can use U-bolts such as # CE15283GA-2 which are 3-13/16 inches long, 3-1/16 inches wide, and have a 1/2 inch diameter. Or you could use # CE15283GA-4 which is the same thing only it comes with 4 U-bolts instead of 2.
You are not limited to these u-bolts if you require a different size.
Products Referenced in This Question
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: Comparison Of Trailer Equalizers TREQE34 and TREQE1
- Search Results: shackle links
- Search Results: grease cap
- Q&A: Replacement LED Light Installation on Trailer Cargo Platform
- Search Results: trailer leaf spring suspension
- Search Results: hub dust caps
- Search Results: trailer leaf spring
- Search Results: cotter pin
- Search Results: axle cotter pin
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Equalizer Bolt with Cotter Pin and Castle Nut - 7/8" Diameter
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Article: What Exactly is Tongue Weight?
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: Using XTRM Universal Sealant to Replace Existing Original XTRM Caulk on Roof
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Rent an RV
- Article: How to Charge RV Batteries
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: How to Measure for Trailer Hitch Drop