Weight Distribution System Recommendation for a 19 foot Travel Trailer
Question:
I have a 19foot travel trailer and its a gvwr of 3500 lbs. I was wondering what weight distribution hitch would be recommended. Thanks
asked by: Jeffrey M
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well.
Typically tongue weight is 10-15 percent of the total trailer weight. For your trailer at 3,500 lbs that would put you at 525 lbs of tongue weight.
For a system rated for that tongue weight I would recommend the Reese Weight Distribution System w Shank - Trunnion Bar # RP66541 as this system is rated for tongue weights of 400-800 lbs. For a ball to go with this system I would recommend the part # 19286.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Product Page this Question was Asked From
Reese Weight Distribution System w Shank - Trunnion Bar - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 600 lbs
- 700 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Optronics LED Clearance or Side Marker Light # 00212336P have a Reflector
- Q&A: Choosing a Weight Distribution System for a 2006 Toyota Sequoia
- Q&A: Trailer Hitch Extension for Use Behind a Truck Bed Camper
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Can You Back Up with a Curt Weight Distribution System Installed
- Q&A: Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: Availability of Weight Distribution for 1-1/4 Inch Receivers