Will Curt Gooseneck Trailer Hitch Flat Plate 65500 Fit a Class C Freightliner M2

Question:

Hi.... we have class C Freightliner M2 106 with frame rails 33.50 wide. We need a goose neck plate installed for a horse trailer. Your plate will work that is 48inch wide 30,000 lbs ?

asked by: Jerry K

Expert Reply:

You can use the Curt Gooseneck Flat Plate # C65500 on your Freightliner. But it does require a custom installation from a qualified professional installer.

The instructions, which are 2 steps, state:

1) The hitch must be centered between the sides of the truck and about 2"-6" in front of the rear axle for proper weight distribution.

2) (6) 5/8 inch grade 5 bolts torqued to 210 ft-lbs are recommended to fasten plate to truck frame.

NOTE:
- Shims should be used to accommodate corrugation in pickup bed.
- When exceeding 20,000 gross trailer weight, a bed floor support should be fabricated and installed to prevent the bed floor from collapsing.
- Hardware not included.
- Mounting holes must be drilled by installer.