Hole Depth Needed When Installing Optronics Pigtail # A46PB

Question

Question:

product #mcl50ab and product #a46pb. when this pigtail is installed into the led clearance light, what is the overall combined thickness. how deep does the hole have to be. thank you

asked by: Alan D

0

Expert Reply:

Since the Optronics Two Wire Pigtail, part # A46PB can fit several different lights the thickness would vary depending on the light you are installing this with. I pulled one of the pigtails from our warehouse and took a measurement for you. The depth of the pigtail plug is .6 inches. I have included a photo that has the dimension noted on it.

This pigtail will fit the following:
Uni Bond # PT6020
Wesbar # 108662
Truck Lite # 94902
Grote # 67050
Peterson #142-49
Bargman # 40-00-002

I could not find a reference for the number mc150ab you mentioned in your question.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

I can help you with greasing up your EZ Lube Axle. First thing I would check would be that the grease is not coming out of the back of the axle through the seal. If this is the case you will need to replace the seal. Our tubes like #L11390 have 14…

view full answer...

Answer 2

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 3

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...

Answer 4

The Dexter hub part number prefix 8-201 could refer to many items and includes many possible weight capacities. So the best way to go is to pull one hub, remove the bearings and find their stamped part numbers. If you happen to know the axle's…

view full answer...

Answer 5

A trailer can have either 4-pole or 5-pole connectors and the number of actual wires can vary too. For instance, the part you referenced #16-4B-1, is 4-pole wiring like what is included in a part like #W787274 which is a trailer-side 4-pole setup…

view full answer...

Answer 6

I've put in a request to have the video reshot, but in the meantime changing the bulb is very easy. Simply remove the Phillips screw from the underside of the lamp assembly. Once the screw is removed, you can gently pry the clear plastic cover…

view full answer...

Answer 7

We currently don't stock a 2 inch that is 11/16 inch deep. The closest we have are two and a half inch and 11/16 inch deep LED red lights: #MCL59RB #MCL57RB Another very close option would be Optronics GloLight LED #MCL155RB. It's 2 inch…

view full answer...

Answer 8

I looked up one of your previous order (Thank you, by the way. We love return customers) and what you've gotten in the past are 7-way connectors that use traditional RV wiring. The easiest way to pick them out is that they have a red wire. I…

view full answer...

Answer 9

The Uni-Lite Mini LED Side Marker and Clearance Lights, like part #MCL11AKB and #MCL11RKB, are not rated as reflectors. We do have a couple of options that you might consider. Check out the 2-1/2 inch Round LED Trailer Clearance, Side Marker Light…

view full answer...

Answer 10

If you take a look at the photos I've attached you can see how the wires from a 7-way connector can be run to junction box #38656. You would also need ring terminals #44-5310A. I've added a link to a video review, as well as an install of…

view full answer...

Answer 11

While I was not able to find anything that cross referenced with the SAE number you mentioned the Optronics light part #STL13RFHXB is very close to what you mentioned in terms of size and function so it would work great. This is a very common style…

view full answer...

Answer 12

The Trailer Wiring Junction Box part #3375601100 and Trailer Wiring Junction Box part #38656 are both pretty standard 7-terminal junction boxes. The latter is slightly smaller so there will be more places to mount it so that is what I recommend but…

view full answer...

Hole Depth Needed When Installing Optronics Pigtail # A46PB

Product Page this Question was Asked From

Continue Researching