Ball Diameter/Shank Diameter and Length for the Ball in the etrailer.com Ball Mount Kit # EBMK25518
Question:
Question, Why do you list a kit like this and not show all the specifications, like that of the ball that is supplied with the kit? I assume it is a 2-5/16inch but it would be great if you could actually show this information. Is the hole in the mount 1inch or 1-1/4? These are determining factors that would be nice if put out in front so questions do not have to be asked. Thank you.
asked by: Curt C
Expert Reply:
The ball that is included with the etrailer.com Ball Mount Kit # EBMK25518 that you referenced is a 2-5/16 inch ball. In the second bullet point of the description that info is listed.
The diameter of the shank is 1-1/4 inches and 2-3/4 inches long. Since this is sold as a kit and all the parts are compatible this information wasn't as easy to find. In the second bullet point the part number for the ball is listed (part # 63840) and on it's product page this info is listed.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 20000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Product Page this Question was Asked From
etrailer Ball Mount Kit for 2-1/2" Hitches - 3-1/2" Rise or 5" Drop - 18,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 5 Inch
- Rise - 3 Inch
- Fits 2-1/2 Inch Hitch
- 18000 lbs GTW
- Class V
- Ball Mount Kit
- etrailer
more information >
Continue Researching
- Search Results: 1 7/8 socket
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: eq~356
- Search Results: grease cap 272
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
- Shop: 1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Q&A: Troubleshooting Grease Only Going Through Grease Zerk and Not Into Wet Bolt On MORryde # MR76ZR
- Shop: Brake Controller
- Shop: BOLT brand vehicle and hitch locks
- Search Results: dexter 13 104
- Search Results: equalizers
- Search Results: suspension kits
- Search Results: dexter suspension kits
- Video: Trailer Brake Controller Installation - 2002 Chevrolet Silverado 3025-P
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR
- Video: Choosing the Right Trailer Wiring
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Video: Trailer Hitch Installation - 2005 Chevrolet Silverado - B&W BWHDRH25182
- Q&A: How To Measure The MORryde Suspension Upgrade Kit
- Q&A: How To Determine Correct Wet Bolt/Shackle Upgrade Kit For Tandem Axle Trailer
- Q&A: Weight Distribution System Recommendation for a Trailer with 2,000 lbs Tongue Weight
- Q&A: Do the Bolts of the Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit Have Splines
- Q&A: Replacement Brackets for Tekonsha P3 Brake Controller
- Q&A: Does Curt Trailer Hitch # C15302 Have Same Ground Clearance as Factory Hitch
- Shop: BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to GM Center Cut Key
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs