Weight Distribution Recommendation for a 2011 Nissan Frontier Towing a 3000 lb R-Pod Trailer.
Question:
Hi, I have a 2011 Nissan Frontier 4x4 crew cab towing a 3000 pound R-pod with about 300 pound tongue weight. The truck has factory tow package and is rated 6300 pounds for towing. I feels like the trialer is exagerating the bumps. Can anything be done to correct this or is it normal and to be expected? Thanks,
asked by: Dan U
Expert Reply:
Some bumpiness comes with the territory when you are towing a trailer. A weight distribution system should help you smooth out the ride quality of your 2011 Nissan Frontier Towing a 3000 lb R-Pod trailer. Weight distribution systems are recommended when the trailer weighs more than 50 percent of the tow vehicle. So you would be a good candidate for a WD system. Weight distribution does what it name implies and distributes the tongue weight of your trailer to the front axle of the tow vehicle to help smooth out the ride and improve handling and braking characteristics.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well.
If the 300 lbs you listed is your loaded tongue then for a weight distribution system I would recommend the Reese Weight Distribution System w Shank # RP66540. This system has a tongue weight range of 200-600 lbs so it should work very well for you.
I attached an FAQ on weight distribution systems for you to check out also.
Suspension enhancements like the # TTRA1702 that you referenced aren't designed for trailering applications. They are designed for vehicles that are carrying a lot of weight in the bed or cargo area of the vehicle.
Product Page this Question was Asked From
Timbren Trailer Suspension Enhancement System Light-Duty Trailers 1,000 lbs
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Rubber Springs
- 1000 lbs
- Single Axle
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: Replacement Trailer Jack Recommendation for Dutton-Lainson Jack on Ranger Trailer
- Q&A: Troubleshooting Kodiak 225 Trailer Brake System that Keeps Breaking Calipers In Half
- Q&A: How To Determine If Timbren Trailer Suspension Enhancement # TTRA1702 Will Fit Single Axle Trailer
- Q&A: Compatibility of Timbren Suspension for Light Duty Trailers on 1957 Cardinal Travel Trailer
- Q&A: Will Gen-Y Torsion 2-Ball Mount Reduce Abuse on Trailer Tongue
- Q&A: How Tall Are The Timbren Trailer Suspension Enhancement Springs For Underslung Axles?
- Article: How to Raise Your Travel Trailer Height
- Article: Rooftop Cargo Carriers
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Ball Mount Basics: Weight Capacity, Class, and Size