Replacement Bearings Races And Seals For Agricultural Trailer
Question:
on my trailer i have timken bearing in there.the beaeing no. is lm11949 and i want to go to a reline bearing.could you tell me what kit no. to get or the bearing no. itself. i would like to buy the whole kit with race and seal. thank-you
asked by: Jerry H
Expert Reply:
I was unable to find Timken bearings with the LM11949 part number. The part # LM11949 we carry is a replacement outer bearing for AH15450E agricultural hub. These have an inner diameter of .750 inches.
The matching outer race for this bearing is part # LM11910. The outer seal that works with this bearing and race is part # SL150.
We do not currently offer a kit that includes the # LM11949 bearings.
I highly recommend replacing the inner bearings, races, and seals at the same time.
The inner bearing that is a match with the # LM11949 is part # LM67048, the race is # LM67010,and the seal is SL150.
When part numbers are not visible on the old grease seals or bearings taking measurements of the spindles themselves is the next best option. You will want to obtain an accurate measurement of the spindle using a precision instrument like a dial caliper. I have included a link to our product page for grease seals. This page lists all seals by ID and OD.
Products Referenced in This Question
Replacement Race for LM11949 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.781 Inch O.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Race for LM67048 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.328 Inch O.D.
- Bearing LM67048
- Race LM67010
- 5200 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.500 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Correct Bearings for LCI35 Lippert 3,000 Lb Trailer Axle
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Does Hellwig EZ-550 Install In Front or Behind Rear Axle on 2023 Toyota Tacoma
- Q&A: Parts Needed To Convert 5TH Wheel With Tandem 7K Axles To Disc Brakes and 17-1/2" Wheels Oil Lubed
- Article: Rust Prevention
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle