Recommended Bearing Buddies for a 1.98" Hub Bore
Question:
Looking for bearing buddy size for Dexter 4400 axle on Imagine trailer. Brother tells me 1.98 but I am not entirely sure how confident I am of that.
asked by: Andrew
Expert Reply:
Andrew, if those measurements are actually accurate then the correct Bearing Buddies are going to be the Bearing Buddy Bearing Protectors # BB1980T-SS.
If you're not 100 percent sure, then I'd recommend measuring it yourself using a set of digital calipers. What you'll need to measure is the hub bore, which is the opening in the hub.
From here, if the measurements match what you were told then you're good, if not let me know what it is and I'd be happy to help.
![Bryce D](https://images.etrailer.com/static/images/catg/people/2838_tn.jpg)
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Possible Bearing Buddy that Could Fit Hub with Seal 12194TC
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Q&A: Availability Of Threaded Bearing Buddy Bearing Protectors For a 1.98" Hub Bore With Fine Threads
- Q&A: Battery Charger for a Trailer Battery on a Dump Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide