Wobbly Head After First Trip w/ the Stromberg Carlson Electric Trailer Jack
Question:
I have an issue with the Stromberg Carlson JET-5000 I recently purchased. The head assembly move/wobble while operating. The head assembly was steady and solid on my first camping trip and on my second trip, a week later, I noticed the head assembly moving while lifting and lowering the camper. Please advise
asked by: Bobby
Expert Reply:
Sounds like something loosened itself up after the first trip. I recommend lifting the cover and retightening the bolts on the Stromberg Carlson Electric Trailer Jack item # JET-5000. You'll want to check the mounting bolts too.
![Jerred H](https://images.etrailer.com/static/images/catg/people/2777_tn.jpg)
![](https://www.etrailer.com/static/images/catg/people/IMG2_250.jpg)
Bobby
5/21/2024
Jarred, I removed the cover as you recommended and found 4 hex bolts loose. I tightened the bolts and the issue was resolved. Thank you for your quick reply and recommendation. Bobby
![](https://www.etrailer.com/static/images/catg/people/IMG10_250.jpg)
J.c.
6/11/2024
I had the same problem with my new Jet-4500. I followed your suggestion. Opened the covered, and found the 4 hex bolts loose. Problem solved. Thanks. If it reoccurs, is it a good idea to apply some « loctite »? This seems to be a recurring problem, isn’t Stromberg aware of it?
![](https://www.etrailer.com/static/images/catg/people/2777_250.jpg)
Product Page this Question was Asked From
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Leveling Jacks
- Tongue Jack
- Steel
- 4001 - 5000 lbs
- Electric Jack
- 23 Inch Lift
- Bolt-On
- 1 Jack
- Stromberg Carlson
more information >
Continue Researching
- Q&A: Trailer Wiring Harness Recommendation for a 1999 Isuzu NPR
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: How to Charge a Dump Trailer Battery
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Add Tension to Solera Slide-Topper
- Q&A: Is There Down Side to Progressive Dynamics 4000 Series 60 Amp Over 45 Amp
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: Best Bike Racks for Electric Bikes
Bobby
5/21/2024
Thanks Jerred! The mounting bolts are solid. When I get the chance I will lift the cover and check the bolts. I'll report back on my findings. Thank you.