Replacement Seal for Cool Hub on a 2000 Ranger Bass Boat Trailer
Question:
i have a 2000 model ranger bass boat that has cool hubs on the trailer . the trailer vin is XXX i was wondering if you could tell me what seals and orings that i need.
asked by: Mike C
0
Expert Reply:
Hey Mike, thanks for reaching out!
I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal # TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end.
I don't know what O-Ring sits behind your cap but if you can give me some dimensions I can see if we have one for you.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- Timken
more information >
Continue Researching
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Pricing difference for Timken parts.
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Recommended 1" Diameter Spindle Nut Kit
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Tire Sizing
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: Will DeeMaxx Disc Brake Kit Fit 2021 Coyote Trailer
- Q&A: Parts Needed to Switch a Trailer From Surge Brakes To Electric Over Hydraulic Brakes
- Article: Big Truck Big RV
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams