Will the Trailer Idler Hub Assembly for 2,000 lb Axles Work With a 1" Spindle
Question:
I am asking about AKIHUB-440-2-G-1K hubs. My hubs are from an older trailer it has 1 inch spindler and it is only 4 1/4 inches long from base to end of threads. I would like to know if these will fit? my old one if I measure the inside of the hub from seat to seat is 3inches so its a short hub. Thanks Tom
asked by: Tom L
Expert Reply:
Tom, the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-G-1K are going to work with BT8 spindles like # TRU59FR which have a diameter of 1 3/8" and an overall length of 8 1/4" so it's not going to work with your current spindles.
Your best bet would be to replace the entire axle with one that has more common sized spindles because I'd highly doubt you're going to find anything that works with those spindles.
If you let me know the capacity of your axles, the spring seat center to spring seat center, and the hub face to hub face measurements below, I'd be happy to find something for you.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Measuring a Trailer Tire
- Article: Trailer Maintenance Schedule