Can I Install the Demco Channel Tongue Trailer Coupler w/ Only Two Bolts?
Question:
If I only have the two bolt hole 3-in apart will this still work
asked by: Perry D
0
Expert Reply:
No, it won't. You'll be able to attach the Demco Channel Tongue Trailer Coupler item # DM15000-52 but it won't have the same capacity rating because it is designed to be attached with all 4 bolts. It should not be expected to perform as advertised with only half of the mounting bolts securing it. I recommend installing it and then drilling out the other holes so you can use all 4 bolts.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 10000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Continue Researching
- Q&A: Replacement Demco EZ-Latch Coupler For 2" Balls For A Trailer
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Shelby 5107 A-Frame Trailer Coupler
- Q&A: Replacement Hub And Bearing Kit For An AL-KO 8460 Hub
- Article: How to Choose a Trailer Hitch Coupler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Q&A: Replacement 3/8 Diameter Plunger Pin Assembly
- Q&A: Backup Camera System Used with Factory Monitor on a Ram 3500
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Couplers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision