Is There a Dual Friction Sway Control Weight Distribution Head for the Trunnion Style Hitch
Question:
Does the hitch head have provision for the small ball used for a friction type sway control? Actually it would be nice if it had provision for friction sway control on each side, as my current hitch is set up that way.
asked by: Stephen H
Expert Reply:
Yes, the weight distribution head has a mounting hole for a sway control ball like the Sway Control Ball, item # RP58060. The weight distribution head included with the Trunnion Style Weight Distribution Hitch System for Titan 2-1/2 inch Receivers, item # RP66006, has the sway control ball on the right side of the head only. There is not a trunnion style head available with two sway control ball mounts available.
The best option for sway control with the Trunnion Style Weight Distribution Hitch System, item # RP66006, is the Dual Cam High Performance Sway Control, item # RP26002. This system will perform much better than the friction sway control by helping to stop sway before it begins rather than just reducing sway once it has started. The Titan weight distribution system can be purchased as a kit with the straight line dual cam sway control, that item number is # RP66075.
Products Referenced in This Question
Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Replacement Ball for Reese Friction Sway-Control System
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Ball
- Reese
more information >
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Titan Weight Distribution w/out Shank - Trunnion Bar - 17,000 lbs GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is There a Trailer End 4-Round With Wires
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Recommended Weight Distribution System For 12K Equipment Trailer
- Q&A: Should Spring Bars Come Off Of Dual Cams While Turning With Strait-Line Weight Distribution System
- Q&A: Trunnion Spring Bars On Reese Strait-Line Weight Distribution System Fall Out During Turns
- Q&A: How to Properly Set the Tension on the Curt Sway Control Bar # 17200
- Q&A: Replacing Halogen Flood Lights On a Haulmark Enclosed Trailer for LED Units
- Article: Determining Trailer Tongue Weight
- Article: Calculating Portable Generator Power Needs
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Gooseneck to 5th Wheel Adapters
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?