How To Measure For Replacement Wheels For A Boat Trailer
Question:
Looking for a boat trailer wheel. Looks like this but I measure 7 wide: Dexstar AM20447 That said, the tiere is ST205/75R14 so I guess the measured wheel diameter is not correct. Also, my wheels are a chrome finish. Im looking for this pattern match the rest. I can send pictures.
asked by: Gordon L
Expert Reply:
Hey Gordon,
If the sidewall of the tire says ST205/75R14 then you should have a 14" diameter wheel. The # AM20447 you were looking is a 15" wheel so you'd want to stick with a 14" wheel unless you have to clearance to increase the sizing. The wheel diameter is measured from bead to bead. I'd also check your wheel bolt pattern just to ensure you don't get the new wheel and find it doesn't match up to the stud pattern of the hub. I've attached a pic below showing how to measure.
If you want to send me some pictures of your current wheels I can take a look at the design and try to find a match for you. See if you can also find the load range by the tire code so we can make sure each wheel is rated for the same capacity.
Products Referenced in This Question
Dexstar Directional Silver Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Product Page this Question was Asked From
Steel Spoke Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Americana
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Kenda Tires and Wheels - Tire with Wheel - AM32156 Review
- Shop: Dexstar Directional Silver Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2
- Shop: Steel Spoke Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Bearing Kit for Trailer that Has 3,500 lb Axles
- Q&A: How to Clear Retract Time Out Return Levelers Error on LCI Level Up System
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Article: How to Choose the Right Trailer Hitch Class
Gordon
5/6/2024
Hey Kevin, thanks for the reply. It is a 5 bolt pattern, 5 on 4 1/2. Load range C: Max load Dual: 710kg, 1570#. I have pictures; how / where do I upload them? I don't see any upload or attach link.