Troubleshooting Trailer Wiring Harness Right Turn Signal Not Working
Question:
i have a 2023 jeep wrangler useing curt 58920 everything works but right hand turn signal...any ideas ...Thanks..Dwane
asked by: Dwane K
0
Expert Reply:
Hey Dwane, so it's going to be one of three things. It's going to be that the module failed, the connections of the harness to your vehicle aren't solid, or there is corrosion on pins of the 4-way.
First try using sandpaper to clean all of the 4-way pins, then try unplugging and replugging in the harness connections to your vehicle. If that checks out it's probably the module.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Article: Determining Trailer Tongue Weight