What is the Brake Pad Thickness of the 10" Dexter Electric Trailer Brakes K23-086-087-00?
Question:
I have a 2010 Jayco Eagle superlite trailer. What is the thickness of the friction material when new so I can tell the amount of wear. Thanks James Knight
asked by: James K
0
Expert Reply:
The brake pads on the Dexter Electric Trailer Brakes item # K23-086-087-00 are 3/16" thick. Dexter Axle recommends replacing them once they get down to 1/16" thick.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Article: Trailer Wiring Diagrams
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Article: Most Popular Wheel Bearings
- Q&A: Operation of Parking Brake on Electric Trailer Brake Assemblies
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Trailer Brake Actuator Cycles On and Off
- Q&A: Testing The Dexter Electric Over Hydraulic Brake Actuator
- Q&A: Troubleshooting Dexter Brake Actuator
- Q&A: Parts Needed to Add Brakes to 2019 Meher Trailer with 3,500 lb Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function