Parts Needed To Install New Brakes, Bearings and Hub/Drums On a 2015 Haulmark Trailer
Question:
Hi. I am looking to replace the brakes and bearings on my 2015 Haulmark trailer. I was wondering if you sold a kit with everything I would need for this project. For example bearings, grease seals, brakes and new drums. Thanks
asked by: Matthew N
Expert Reply:
To know what parts your 2015 Haulmark Trailer is going to require I either need to know exactly what parts you currently have or if you can find the axle tag from the manufacturer I can see what parts they installed from the factory. The axle tag is typically on the center of the axle tube and back side of the axle.
The most commonly used size axle is a 3,500lb which would require the following components per axle.
Brake Assemblies # AKEBRK-35-SA qty 1
Hub/Drum # 84546UC3-EZ qty 2
The Hub/Drum # 84546UC3-EZ comes with bearings and grease seal pre-greased and installed
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer