Replacement Bearings for a 2003 Keystone Montana

Question:

Im looking for bearings and possibly breaks for my 2003 Montana. The axles are 3 inches in diameter and approximately 79 inches between the springs. Im not finding any marking on the axles. The camper has 16 inch tires on it if that helps at all. If you need anything else please ask. Thanks for your help. Steve Schwartz

asked by: Steve S

Expert Reply:

Hey Steve! In order to figure out what replacement bearings your 2003 Montana needs you're going to need to pull one of the hubs and take a look at the bearings you have. There will be part numbers stamped into the sides that will identify not only what replacements you need but also the capacity of your axles.

A 3" diameter axle could be anywhere between 5,200 lbs and 7,000 lbs in capacity. Which narrows it down to a few options like the Bearing Kit item # BK3-300 that works with 5,200 lbs axles. If you would like to email me back with those numbers or comment them below, I would be happy to find you a the correct bearing replacement kit and a set of brake assemblies.

expert reply by: Jerred H