Will Exceeding Axle Capacity Bend an Axle
Question:
I have a 5 th wheal RV with a dry weight of 9,484 lb + cargo capacity of 2,732 lb . I have 2 5200 lb Lippert axles under it and was wondering if these were capable of this load . The hitch weight is 1,875 lb.the reason Im asking is because I know I have never exceeded the total weight of12,216 lb but Ive got a bent axel and spindle Ive only had this RV about 18 months and pulled less than 10,000 miles .
asked by: Carroll A
Expert Reply:
Based on the calculations you gave me, you did exceed your axle capacities. Your total trailer weight after cargo is 12,216 lbs yet you only have axle capacity of 10,400 lbs.
As I'm sure you know you will need to replace your bent axle, but I cannot safely recommend you exceed your axle capacity. If you check the sticker or plate near the coupler of the trailer the axle capacities and trailer capacities should be listed there.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Article: Trailer Tire Sizing
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Replacement Bearings 2788 and 1779
- Q&A: Replacement Trailer Bearing for L44640
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a Trailer Axle and Spindle
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template