How to Tell if 1997 Ford F350 Has Overload Springs

Question

Question:

I have a 1997 F350 crew cab diesel. It is 4wd and has firestone levelers installed. How do I know if it has overloadinch springs? Is the higher bed height on my 4wd an issue with a gooseneck hitch? Looking at the BW thank you

asked by: Sean H

0

Expert Reply:

If you look at your rear leaf springs, and see an extra leaf as shown in the diagram, you have the overload spring option. For a 1997 F350 with overload springs, you'd need the B and W Turnover Ball # BWGNRK1110. If your truck does NOT have the overload springs, go with part # BWGNRK1100.

expert reply by: Mike L

0

click to enlarge

Answer 1

The thickness of the #TLA7200 block itself is 2.25" in height. The height of the anti rock plate is 9/16" in height.

view full answer...

Answer 2

Look at the rear leaf springs of your 2015 Ford F-250. You should see a bundle of metal springs held together with a metal band. If you see a spring on top of this that looks separate and angles up to make contact with a bracket on the frame that…

view full answer...

Answer 3

The number on the lens is not a part number. It is a rating for the lens/light. Based on that number it looks like the best match we have is #A31RB which is rated SAE AP2 86. The A in the number just means that it has a built-in reflector.

view full answer...

Answer 4

Since the R4Tech systems have been discontinued, I recommend going with a more simple solution that will provide suspension enhancement and help to reduce sway. Take a look at the SuperSprings Custom Suspension Stabilizer and Sway-Control Kit,…

view full answer...

Answer 5

There is an excellent suspension enhancement system I can recommend for your 2008 Ford F250 that has the Pullrite Industry Standard mounting kit part #2726. But I checked the installation instructions for this rail kit and the #AL57398 and found that…

view full answer...

Answer 6

If your leaf springs are already located above your trailer axle then the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 won't change anything as its designed to relocate axles from above the leaf springs to below the leaf springs.…

view full answer...

Answer 7

I spoke to my contact at Reese and he informed me that the correct sheet from the installation instructions of the Reese Universal Base Rail Kit #RP30035 that you referenced would be sheet 11. The wording on the title of that page is a little…

view full answer...

Answer 8

When installing The RoadActive Suspension Kit on your 2022 Chevrolet Silverado 2500 the difference between the HD and the CHD is that the #RAS3611-CHD fits vehicles with overload springs whereas the #RAS3611-HD fits versions without the overload…

view full answer...

Answer 9

Using Item Number 2776782 on the tag in your picture I can tell you pin box is a Lippert 1621 series. So the correct 20,000 pound Goose Box is part #RP85FR.

view full answer...

Answer 10

Unless you'd be interested in going to a different suspension enhancement setup we won't have a solution since all of the gooseneck hitches we offer mount on the outside of the frame rails where your current air bag brackets are. The B and W…

view full answer...

Answer 11

The only 5th wheel hitch that we have that is compatible with your 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft. bed with lift springs and uses below bed rails is the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W. If you mean Overload springs…

view full answer...

Answer 12

It does sound like you have found some clear damage to your 5th wheel trailer's leaf springs that will require attention. Uneven tire wear can be caused by a number of things - incorrect pressure, inadequate weight on the axle or a visibly…

view full answer...

How to Tell if 1997 Ford F350 Has Overload Springs

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching